VEX100-18G-KIT
QUICK REFERENCE GUIDE
www.rticorp.com
02
6
HDBaseT Input
- RJ45 Connector. Connect to
HDBaseT output on VEX100-18G-TX
7
Firmware Port
- Used for firmware upgrade
8
Optical Audio Input
- TOSLINK audio input
9
HDMI Output
- Connect to the HDMI input on local
display device
q
HDMI Link LED
- LED will be lit when an active HDMI
connection is detected
w
Audio Return Selection Switch
- Switch between
OPT and HDMI when using Audio Return feature
e
Ethernet Port
- Connect to local network products to
extend 10/100 network from HDBaseT Transmitter
r
Hardware upgrade selection switch
1
Power Port
- Connect RTI 15V DC power supply
only.
NOTE:
HDBaseT extender kit can be powered
from either the Transmitter or Receiver by using the
Power over Cable (PoC) feature
2
Power LED Indicator
3
IR OUT Port
- Connect to RTI 12V Transmitter.
Connection is used to control the local source or
display device from RTI IR Receiver connected at the
VEX100-18G-TX
4
IR IN Port
- Connect to RTI 12V IR Receiver.
Connection is used to extend IR over the HDBaseT
signal to control devices located at the VEX100-18G-
TX end
5
RS-232 Port
- Bi-directional RS-232 with VEX100-
18G-TX, RS-232 port
8
Power Port
- Connect RTI 15V DC power supply
only.
NOTE:
HDBaseT extender kit can be powered
from either the Transmitter or Receiver by using the
Power over Cable (PoC) feature
9
Power LED Indicator
q
IR OUT Port
- Connect to RTI 12V Transmitter.
Connection is used to control the local source
device from RTI IR Receiver connected at the
VEX100-18G-RX
w
IR IN Port
- Connect to RTI 12V IR Receiver.
Connection is used to extend IR over the HDBaseT
signal to control devices located at the VEX100-
18G-RX end
e
RS-232 Port
- Bi-directional RS-232 with VEX100-
18G-RX, RS-232 port
r
HDBaseT Output
- RJ45 Connector. Connect to
HDBaseT input on VEX100-18G-RX
t
Firmware Port
- Used for firmware upgrade
y
Hardware upgrade selection switch
1
EDID Management
- Used to manage the video and
audio resolution output by the connected source
device
2
HDMI Link LED
- LED will be lit when an active HDMI
connection is detected
3
HDMI Input
- Connect to the HDMI output of the
local source device
4
Optical Audio Output
- TOSLINK audio output.
Connects to local AV amplifier when using Audio
Return Channel (ARC) feature
5
Analog Audio 2ch L/R Output
- Connects to third
party audio amplifier for audio breakout of either local
HDMI or Audio Return Channel from VEX100-18G-RX.
NOTE:
Audio format must be 2ch PCM
6
Audio Output Selection Switch
- Select ARC output
from HDBT receiver as either HDMI or audio breakout
via optical output and analog L/R audio
7
Ethernet Port
- RJ45 Connector. Connect to a
local network switch to extend 10/100 network to
HDBaseT Receiver ethernet port
Panel Description
VEX100-18G-TX
VEX100-18G-RX
1 2 3
4
5
6
7
8
9
q
w
e
r
2
1
3
4
5
6
7
8 9 q w
e
r
t
y
