background image

9

It’s Under Control

®

CHAPTER 1  |  WELCOME

Thank you for purchasing the T2-B Universal System Controller.

The T2-B combines the power and flexibility of a graphic LCD touchscreen 

with an ergonomic design that permits effortless one-handed operation. This 

design overcomes the need for a compromise between form and function. 

Sleek and perfectly balanced, the T2-B takes complete control of the home 

theater, replacing all other remotes. It features an intuitive, easy to read 

LCD that can display custom buttons, text, graphics, symbols, icons, and 

scrolling lists. In addition to the backlit display, a variety of “hard” keypad 

buttons allow easy access to frequently used functions.
Programming is easy and convenient thanks to the Windows® based 

Integration Designer™ software. Because RTI’s remote control products are 

sold only through professional installers/programmers, and never directly to 

consumers, it is our philosophy to not incorporate programming capability 

directly into our products. Instead, we are committed to providing our 

dealers with the hardware and software tools that allow them to create 

re-usable programming databases and templates in the most efficient and 

reliable way possible.
The T2-B is capable of both infrared and radio frequency output. Optional 

RF receivers are available for transmission through walls and cabinets. The 

RF receivers connect to an RTI control system for the ultimate in control 

reliability and flexibility. RTI control systems provide many advanced 

features such as IR routing, local macro execution, power sensing, and RS-

232 control.

COMPATIBILITY

The T2-B and 

Integration Designer™

 software are compatible with infrared 

(IR) commands with carrier frequencies between 5KhZ and 0KhZ, as 

well as those commands that do not use a carrier. This covers virtually all 

of the remotes that exist to date.

SOFTWARE REQUIREMENTS

The recommended minimum system requirements needed to run the 

Integration Designer™

 software are as follows:

  Windows 2000®, Windows XP® or later version.
  A free USB port.
  At least 25 Megabytes of RAM.
  At least 250 Megabytes of free disk storage.
  Screen resolution of 800x00 with -bit color.
  Optional printer for printing reports.

Summary of Contents for T2-B































Reviews: