2
It’s Under Control
®
CHANGE PASSCODE
This button displays a window that allows you to set the passcode that is
used to limit access to the Clear All function on the control panel page, as
well as the Button Lockout function that is available on all buttons.
When you press the Change Passcode button, the screen will prompt you
to enter the old passcode using the hard keys, then press the Enter key on
the keypad.
(The default code is 0000).
Now enter a new four-digit passcode, then press Enter.
You will be prompted to enter the new four-digit passcode again for
confirmation, then press Enter.
When new code is entered successfully, the Code Changed window will pop
up to let you know you have changed the passcode.
Do not forget the passcode!
