![background image](http://html1.mh-extra.com/html/rti/cool-power-cp-16i/cool-power-cp-16i_installation-and-operation-manual_1497608017.webp)
17
It’s Under Control
®
CHAPTER 3 | INSTALLATION AND OPERATION
Connecting Speakers in Bridge Mode
NOTE:
When connecting a speaker to a “bridged” input, verify that the Stereo/
Bridge (SE/BTL) mode switch for the associated Zone is set to “BTL”.
In Bridge Mode, both channels in a Zone are connected to a single speaker, via
the positive (“+”) pins for both output channels:
NOTE:
If incorrect wiring is used there is a risk of electrical shock and a fire
hazard.
The table below illustrates the direct correlation between the audio inputs and
the speaker outputs in Bridge Mode:
Summary of Contents for Cool Power CP-16i
Page 27: ...27 It s Under Control...