Cool Power
®
Audio Amplifier
CP-16i
16
CHAPTER 3 | INSTALLATION AND OPERATION
Connecting Speakers in Stereo Mode
NOTE:
When connecting stereo speakers, verify that the Stereo/Bridge (SE/
BTL) mode switch for the associated Zone is set to “SE”.
Stereo speaker pairs use both output channels (left and right) for each Zone.
• Odd
-numbered channels should be used to connect to the left speaker.
• Even
-numbered channels should be used to connect to the right speaker.
The CP-16i supports up to eight stereo speaker pairs, each one associated with
a Zone (1-8). This diagram illustrates the wiring connection from both Zone
output channels to a stereo speaker pair:
NOTE:
If incorrect wiring is used there is a risk of electrical shock and a fire
hazard.
The table below illustrates the direct correlation between the audio inputs and
the speaker outputs in Stereo Mode:
Summary of Contents for Cool Power CP-16i
Page 27: ...27 It s Under Control...
