![background image](http://html1.mh-extra.com/html/rti/chamber-adapter/chamber-adapter_user-manual_1497595005.webp)
Saftey precuations and intended use of the
Chamber Adapter
Always remember to make all connections when the power is off.
After power off the bias voltage drops slowly due to the high impedance of the Chamber Adapter.
This means that high voltage is present on the connector up to 1 minute after power off.
The Chamber Adapter is only intended for use together with the Piranha and Cobia.
The Chamber Adapter is only intended for use together with ion chambers that works on positive
bias level.
Do not connect an ion chamber that is not intended for +300 V bias voltage, to the Chamber
Adapter.
The Chamber Adapter is only intended to be used with ion chambers that has a LEMO connector or
with available adpaters from RTI Group. AB.
RTI Group AB takes no responsibility for misuse of the Chamber Adapter or use together with
products that the Chamber Adapter is not intended for.
RTI Group AB assumes no responsibility to customers not following these safety precautions.
Note! The Chamber Adapter is intended for service and quality control of diagnostic X-ray
equipment. It is not intended for use during or together with diagnostic examinations of patients.
Chamber Adapter User's Manual
2019-10-14/1.6A
Summary of Contents for Chamber Adapter
