RTI Chamber Adapter, User Manual

Page: 15 / 27

Chamber Adapter User's Manual 2019-10-14/1.6A
15
Function and connection
Select type of ion chamber you want to add from the drop-down list. Any chamber type can be used with the
Chamber Adapter that has the (PBCA) extension. If you can't find your specific chamber, there are three
generic chamber types you can choose which are based on the chamber volume.
Enter the serial number of the chamber you wish to enter in the space below "Serial".
If you want to refer to your ion chamber by a different name than the one listed under "Type", you may
check the checkbox "Override default detector name" and type the name you want to call your chamber in the
space provided below the checkbox.
9. When you click OK to continue, a new pop-up window is shown where you can select the calibration
details:
Select the calibration you want from the drop-down list (for our example, we will choose "Mo/Mo"). Enter the
calibration factor in the space provided. You may select the units of measure and calibration date as well.
Ocean 2014 and the QABrowser assume that your chamber is calibrated at 20°C and 101,4 kPa.
Make necessary changes to the calibration factor if the calibration record for your chamber indicates different
temperature or pressure.
10. Click OK to continue, the new calibration will be saved and all fields are cleared. You may add more
calibrations if you want at this point.
11. To complete our example, just click Close.
12. The final step to adding the new chamber is to store the information in the device. To do this, select the
"Store to device" option on the screen.