Manual: RTI PIKO Series
Manual: RTI PIKO Series
page 10 / 12
page 11 / 12
English
English
8. Control Pad
The device is equipped with a control touchscreen, the following images explain the use of the
touchscreen. Touch the screen to change the settings.
8.1 Starting sequence
Touchscreen
8.2 Main Menu
Laser on / off:
Device is enabled /
disabled
Version and tempera-
ture display
Laser status, amperage
& interlock status
display
Laser on / internal:
The different operation modes can be selected
by using the rotating selector next to the Show-
NET-Display (or FB4) at the back of the device.
Laser on / ILDA in:
The external access
through ILDA is ena-
bled
Color & Scan Setup:
Use these buttons for co-
lor or scan settings
DMX, Adv. and Setup:
Use these buttons for Dmx
settings etc.
Back:
Use this button to return
back.
Status display
8.3 Color Settings:
+ / -:
Use these buttons to
change the color
intensity
Colors:
Please note that
only implemented laser
sources can be changed
in their intensity. If there is
e.g. no yellow laser source
installed in your device,
changing the intensity
slider for yellow will have
no effect. The intensity
change only applies per
single laser source and
does not change mixed
colors. Please use your
software to change mixed
color intensities.
8.4 Scanner Settings:
X Size horizontal:
Use these buttons to
change the horizontal
size of the output
Y Size vertical:
Use these buttons to
change the vertical size of
the output
Y Shift up/down:
Use these buttons to
change the vertical shift
of the output
X Shift left/right:
Use these buttons to
change the horizontal
shift of the output