RTD Embedded Technologies, Inc.
|
www.rtd.com
iii
DM35956HR
User’s Manual
Revision History
Rev A
Initial Release
Rev B
Corrected some typographical errors. Added ASPM note. Changed to 0 based numbering.
Rev C
Added MTBF. Added wire size specifications for terminal block. Corrected title of Table 5 and 6. Corrected maximum and
minimum input voltage specification for opto-isolated inputs.
Rev D
Add IDAN Section. Added User ID Jumpers. Added Isolated Input Current to Table 3. Added mating connector part numbers.
Added relay Inrush specification to Table 3. Added picture of terminal block version.
Rev E
Correct IDAN ordering options to show 62-pin and 68-pin ordering options
Add board dimensions
Describe connector pin orientations and indicate that pin 1 is found by a square solder pad on the board
Correct IDAN weight
Update IDAN dimensions to latest format
Update IDAN isometric drawing
Update IDAN front and back panel drawings to include pin 1 orientation and differentiate between the back panels for the 62-pin and
68-pin ordering options
Rev F
Remove relay inrush current specification from Table 3
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”, cpuModule, dspFramework, dspModule, eBuild, expressMate, ExpressPlatform, “MIL Value for COTS
prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN, HiDA
Nplus, RTD, the RTD logo, and StackNET are registered trademarks of RTD
Embedded Technologies, Inc. (formerly Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104,
PCIe/104, PCI/104-Express and 104 are trademarks of the PC/104 Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed
by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not
be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
Copyright © 2018 by RTD Embedded Technologies, Inc. All rights reserved.
