rtd cpuModule CMi36786HX, User Manual

Page: 90 / 116

CMi36786HX RTD Embedded Technologies, Inc.
82
Real Time Clock Control
The cpuModule is equipped with a Real Time Clock (RTC) which provides system date and time
functions, and also provides 128 non-volatile memory locations. The contents of these memory lo-
cations are retained whenever an external backup battery is connected, whether or not system power
is connected.
You may access the RTC date, time, and memory using an index and data register at I/O addresses
70h and 71h. Address 70h is the Index register. It must be written with the number of the register to
read or write. Refer to the map below for valid choices for the index. Data is then written to or read
from the selected register by writing or reading (respectively) the data register at address 71h.
Registers of the Real Time Clock are shown below:.
RTC access is illustrated in the C program found in application note SWM-640000011 found at
http://www.rtd.com/appnotes.htm
Do not change values stored in the RTC registers listed as
RESERVED in the table below. Doing so will interfere
with proper cpuModule operation.
Table 39: Real Time Clock Registers
Registers
(hex) Registers
(decimal) Number of
Bytes Function
00h 0 1 BCD Seconds
02h 2 1 BCD Minutes
04h 4 1 BCD Hours
06h 6 1 Day of week
07h 7 1 Day of month
08h 8 1 Month
09h 9 1 Year
0A-31h 10-49 40 RESERVED- Do not modify!
32h 50 1 BCD Century
33-3Fh 51-63 13 RESERVED - Do not modify!
40-7Fh 64-127 64 User RAM