rtd cpuModule CMi36786HX, User Manual

Page: 59 / 116

CMi36786HX RTD Embedded Technologies, Inc.
51
First Boot Device
Second Boot De-
vice
Third Boot De-
vice +, -, <PgUp>,
<PgDn> Select from the options the boot sequence for the
CPU
• Floppy
• LS120
• HDD-0
• SCSI
• CDROM
• HDD-1
• HDD-2
• HDD-3
• ZIP100
• USB-FDD
• USB-ZIP
• USB-HDD
• LAN
• Disabled
Boot Other De-
vices +, -, <PgUp>,
<PgDn> Boot from any boot device found if none of the
other boot devices worked.
• Enable
• Disable
Swap floppy drive +, -, <PgUp>,
<PgDn> Swap floppy drive A: and B:
• Enable -- Floppy connected after the twist in
the floppy wire will be Drive B: and floppy
connected before the twist in the floppy wire
will be Drive A:
• Disable (Normal) -- Floppy connected after the
twist in the floppy wire will be Drive A: and
floppy connected after the twist in the floppy
wire will be Drive B:
Boot up numlock
status +, -, <PgUp>,
<PgDn> Set keypad numlock status after boot
• On -- Keypad is number keys
• Off -- Keypad is cursors keys
Gate A20 option +, -, <PgUp>,
<PgDn> Select gate A20 options
• Normal -- Use keyboard controller to control
A20 gate
• Fast -- Allow chipset to control A20 gate
Typematic Rate
Setting +, -, <PgUp>,
<PgDn> Keystrokes repeat at a rate determined by the key-
board controller
• Enable -The typematic rate and typematic de-
lay can be selected
• Disable - Keys are not repeated.
Table 29: Advanced BIOS Features Setup Fields (Continued)