rtd cpuModule CMi36786HX, User Manual

Page: 64 / 116

CMi36786HX RTD Embedded Technologies, Inc.
56
Onboard Parallel
Port (If multiPort
set to Parallel) +, -,
<PgUp>,
<PgDn> Selects parallel port address and interrupt
• Disable -- Parallel port not used
• 378h/ IRQ7 -- Address 378h and interrupt 7
• 278h/ IRQ5 -- Address 278h and interrupt 5
• 3BCh/ IRQ7 -- Address 3BCh and interrupt 7
Parallel port
mode
(If multiPort set
to Parallel) +, -,
<PgUp>,
<PgDn> Select the mode for the parallel port
• SPP -- Standard parallel port
• EPP -- Extended parallel port
• ECP -- Extended Capabilities port
• EPP + ECP -- both EPP and ECP mode
ECP mode use
DMA
(If multiPort set
to ECP Parallel) +, -,
<PgUp>,
<PgDn> Select DMA for ECP mode
• 1 -- DMA channel 1
• 3 -- DMA channel 3
Parallel port EPP
Type
(If multiPort set
to EPP Parallel) +, -,
<PgUp>,
<PgDn> Select the EPP mode for the parallel port
• EPP1.7 -- Extended parallel port compatible with
version 1.7
• EPP1.9 -- Extended parallel port compatible with
version 1.9
aDIO IRQ
(If multiPort set
to aDIO) +, -,
<PgUp>,
<PgDn> Select the Interrupt to use for aDIO
• Disabled
• IRQ 5
• IRQ 7
• IRQ 10
• IRQ 11
• IRQ 12
Watchdog Timer +, -,
<PgUp>,
<PgDn> • Enable
• Disable
Watchdog Timer
IRQ +, -,
<PgUp>,
<PgDn> Select the Interrupt to use for the Watchdog Timer
Disabled
• IRQ 5
• IRQ 7
• IRQ 10
• IRQ 11
• IRQ 12
aDIO/Watchdog
Base Addr. +, -,
<PgUp>,
<PgDn> Select the I/O base address for the aDIO and Watch-
dog. The Watchdog is at Base + 4.
• 300
• 310
• 340
• 350
• 400
• 410
• 440
• 450
Table 31: Integrated Peripherals Setup Fields (Continued)