Real Time Automation, Inc.
9
1-800-249-1612
Powering the Gateway
The following steps will allow you to properly and safely power the gateway.
1)
2)
1)
An 8-35 VDC power source to the gatewaey, Red Wire = (+) Black Wire = (-).
2)
Connect a 8-35VDC power source to the gateway.
a.
The unit draws 8VDC 900mA (7.2W) Max
b.
The unit draws 35VDC 900mA (31.5W) Max
c.
The gateway has a voltage operating range from 8-35VDC, 24VDC is recommended.
Warning
improper wiring will cause unit failure
Use the Screw Terminals power connection
