6
Connections
Phone/Media player
Connect to an external device
- Use a 3.5mm to 3.5mm audio cable
(included) to connect the external audio
device headphone socket to the
LINE IN
socket on the unit.
Set up the FM aerial
- Unwind the coiled FM aerial at the back of the docking station.
IMPORTANT:
You may need to adjust the position of the FM aerial when
tuning the radio to receive the strongest signal.
Never leave the aerial where it can be pulled by young children.
Connect Power
1. Slot the jack plug on the power adaptor
into the power point in the underside of
the base as shown in the diagram above.
2. Slot the power adaptor into a wall socket
and turn the power on, if required.
Note:
- You need to connect the DC power to turn
on the unit , battery only for back up.
- If the unit does not display or no response,
maybe the battery is low power, that need
to disconnect the DC power and replace a new battery, then reconnect DC power and reset the
clock.
For First-time use BACKUP Battery:
Remove the protective tab to activate the backup
battery.
To Replace the BACKUP Battery:
(1) Press down the flip on the left.
(2) Pull out the battery tray and remove the old
battery.
(3) Place a new CR2032 battery into the battery
tray with correct polarity (+/-) as indicated.
(4) Insert the tray back into the slot.
