5
Connections
Connect to an external device
- Use the supplied 3.5mm to 3.5mm audio cable to
connect the external audio device headphone
plug to the LINE IN jack on the unit.
Set up the FM aerial
- Unwind the coiled FM aerial at the back of
the unit.
IMPORTANT: You may need to adjust the
position of the FM aerial when tuning the radio to receive the strongest
signal.
Connect Power
1. Plug in the detachable AC power cord into the DC IN jack at the back of
the unit.
2. Plug the AC adapter into a wall outlet, ensuring rated voltage matches your local voltage.
Note:
- You need to connect the DC power to turn ON the
unit. The battery is only for backup.
- If the timer does not work, the battery may be
low, disconnect the DC power and replace with a
new battery, then reconnect DC power and reset
the clock.
To Replace the BACKUP Battery:
1. Press down the flip on the left.
2. Pull out the battery tray and remove the old battery.
3. Place a new CR2032 battery into the battery
tray with correct polarity (+/-) as indicated.
(We recommend InfiniCell batteries for maximum
performance).
4. Insert the tray back into the slot.
NOTE:
- Batteries are for backup purposes in the event of
a power failure and should be installed prior to
setting up the dock functions.
- If the power fails, or the unit is unplugged and
there are no batteries in the backup, all setups in
the unit will be lost.
- Should your settings be erased, you must reset all of them again as they cannot be restored.
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
The unit supplied with this product contains a coin/button cell battery. If the coin/button
cell battery is swallowed, it can cause sever internal burns in just 2 hours and lead to
death. Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of the body, seek
medical attention immediately.
Phone/Media player
