7
• Repeat Alarm
When the alarm rings, press the SNOOZE/DIMMER button. "
SN 9
" shows in the display.
The alarm will ring again 9 minutes later.
• Stop Alarm Ring
When the alarm rings, press the button. The alarm stops but the alarm settings remain.
Set the NAP Timer
- Press the NAP button repeatedly to select time (in minutes):
05
→
10
→
15
→
20
→
30
→
45
→
60
→
90
→
close up
- The system is now set to buzzer after the number of minutes selected.
- When the NAP timer is activated, "NAP" icon is displayed.
- When the NAP timer rings, press the or button. The NAP timer stops.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1 Press MEM/SLEEP button repeatedly to select a set period of time (in minutes):
90
→
60
→
30
→
15
→
close up
- When the sleep timer is activated, "
" icon is displayed.
Bluetooth® Operation
You can listen to music from a Bluetooth®-enabled device via this unit.
Note:
- The operational range between this unit and a Bluetooth® device is approximately
8 metres (26 ft).
- Before you connect a Bluetooth® device to this unit, familiarize yourself with the
Bluetooth® capabilities of the device.
- Compatibility with all Bluetooth® devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth® device can reduce the operational
range.
- Keep this player away from any other electronic devices that may cause interference.
- If the signal strength is weak, your Bluetooth® receiver may disconnect, but it will re-
enter Pairing mode automatically.
Pair Bluetooth®-enabled Devices
1. Press the button to select
bt
(Bluetooth®) mode. “
No bt
” will show on the display if
the unit is not paired to any Bluetooth® device.
2. The system has entered Pairing mode.
- Or press and hold the
button to be searchable. The display will show “
PAIr
”.
3. Activate your Bluetooth® device and select the Search mode. “inStudio 8037280” will
appear on your Bluetooth® device.
4. Select “inStudio 8037280” in the pairing list. The display panel shows “
bt
” when the
pairing process is successful.
5. Start to play music from the connected device.
- To disconnect the Bluetooth® function, switch to another function on the unit or
disable the function from your Bluetooth® device. Or press and hold the button, the
Bluetooth® device will be disconnected from the unit. The display panel shows "
No bt
".
