28
M0627-1 version 3.3
4.3.3 Replacement of guide pins (P1314) on tool changers
Action
Note
1
Mount puller housing
Enter the puller housing of the
Guide pin puller (VA0182-001)
over the guide pin.
2
Mount puller screw
Enter the puller screw through
the puller housing and guide pin.
Fasten to the tool changer by
screwing clockwise with a 13
mm spanner.
NOTE!
Tightening torque max
3
Nm.
3
Dismount guide pins
Pull out the guide pin by
screwing the M8 nut clockwise
with a 13 mm spanner.
NOTE!
The puller screw shall be
kept in position with a 13 mm
spanner!
4
Mount new guide pins
Apply Loctite 638 on the guide
pins and in the guide pin holes.
Press the new guide pins into
the tool changer.
Summary of Contents for P1301A
Page 2: ...2 M0627 1 version 3 3 ...
Page 34: ...34 M0627 1 version 3 3 ...
Page 35: ...M0627 1 version 3 3 35 ...
Page 36: ...36 M0627 1 version 3 3 ...
