RSP P1301A, Installation And Maintenance Manual

Page: 24 / 36

24 M0627-1 version 3.3
4.2 Replacement of tool attachment
Action Note
1 Safety Read the safety section
(1.2).
2 Undock tool Place and undock tool
attachment, with tool
mounted, in a safe and
fully supported position for
dismounting.
3 Dismount hoses Dismount the water/air
hoses from the tool
attachment.
NOTE! Make sure that no
dirt enters the water/air
hoses.
4 Release electric connections Disconnect electric power
and signals.
NOTE! Handle contacts
with care, as they are
sensitive to mechanical
damage. Make sure that
no dirt enters the contacts.
5 Remove screws
M8/M10
Remove the screws
holding the tool attachment
to the tool.
NOTE! The tool
attachment can be fitted to
the gripper/tool in two
ways.
WARNING! The tool
attachment is heavy and
may cause personal injury
and equipment damage if
dropped.