RSP P0010A, Product Manual

Page: 7 / 44

M0001-1 version 2.0 7
1.1 Safety
1.1.1 General
The integrator installing the valve unit must follow the safety demands stated in standards and
provisions applicable in the country where the valve unit is to be installed.
The user of the Robot System Products valve unit is responsible that law and directives
applicable in respective countries, with regards to safety, are followed. The user is also
responsible to guarantee that all safety devices are installed correctly.
WARNING!
Never carry out service work on a robot that has not been taken out of operation.
See safety information for the robot.
WARNING!
Only perform work on valve units if the air pressure is safely switched off.
WARNING!
Be aware that the valve unit may cause personal injury and equipment damage if
dropped.
1.1.2 Explanation of warnings
The warnings in this document are specific to the products in this manual. It is expected that the
user also pay attention to certain notifications from the robot manufacturer and/or the
manufacturers of other components used in the installation.
WARNING!
The warning sign will make you aware that a situation could result in potential
serious injury or damage to equipment.
NOTE!
The note sign will alert you about something important to consider.