RSI XL600, Complete Setup And Programming Manual

Page: 24 / 30

2011/11/28 E2.5 Installation Manual for XL600GPRS
24 | P a g e
XL Touch pad
Control Panel Keypad Status after Reset or Power:
After the powering on or after a resetting the panel, all symbols and keys of the touchpad are lighted for a
few second before the num-pad lights up alone.
Keys and symbols presentation:
Symbols for events Meaning

When green:
All batteries (panel and devices) are ok

When red:
At least one device (panel or sensor) has low batteries

During the arming process:
Means that a detector (in an instant zone) has been triggered during
the arming process.

In other cases:
Means there is a tamper detection on a device.
Is used to identify :

Device ID (0 for the panel and value from 1 to 19 for other devices)
for tamper, intrusion or other troubles

Trouble ID ('C' for bad code)
Means there is an intrusion detected
For other troubles (Radio Jamming, etc…)
Keys and symbols for
arming and disarming
Meaning
Use to disarmed the system

Key is used to arm the system in STAY mode

Symbol is lighted when system is armed in STAY mode

Key is used to arm the system in AWAY mode

Symbol is lighted when system is armed in AWAY mode
Press on to arm the system in AWAY mode
Keys and symbols for
PANIC calls
Meaning
Must be pressed and held 3 seconds before pressing the panic buttons
When lighted, press on for Police panic call to the monitoring station
When lighted, press on for Emergency panic call to the monitoring station
When lighted, press on for Fire panic call to the monitoring station