RSI XL600, Complete Setup And Programming Manual

Page: 16 / 30

2011/11/28 E2.5 Installation Manual for XL600GPRS
16 | P a g e
Changing Siren Options
In some situations it is required to silence the siren permanently or just for the testing of the system.
10/12/27 10:53
DISARMED LVL:3
ACCESS LEVEL 3
ACCESS LVL: 4
BADGE OR CODE:
****

YES
Press the

arrow to move to ACCESS LEVEL 3.
Use the

arrow to move the level to 4.
Enter the Installer code.
ALARM MODES
PROGRAMMABLE
CONFIGURATION
FULLY ARMED
AREAS: 1234
STATE: AAAA
Display will show GENERAL PARAMETERS.

once to
ALARM MODES PROGRAMMABLE.
Press YES to modify the parameters of the FULLY ARMED
profile.
Press the

once so the keypad says CONFIGURATION.

YES

YES
ALARM:
WITHOUT SIREN
BADGE OR CODE:
****
Enter the Installer code followed by YES
Press YES to keep the default AREAS and STATE which will
arm all devices on the Videofied system.
Use the arrow keys to modify the type of siren that the default
FULLY ARMED profile will use when an alarm is triggered.
Alarm Siren Descriptions :
Siren :
All sounders on the system will be triggered when the system goes into alarm. Entry
and exit delays will also be audible.
Without Siren : Only sounders in the Keypad and Badge Reader will be triggered when the
system goes into alarm. Entry and Exit delays will also be audible.
Silent : No sounders will be triggered when the system goes into alarm. Only the Exit delay
will be audible.
Delay Beeps : Only Entry and Exit delays will sound.

YES

YES

YES

YES
ESC/NO
Press and hold ESC/NO for 5 seconds to return to the main
menu.
SP1 SP1