2011/11/10 Ed 1.5
Setup and Programming manual for XT series GPRS
20 |
P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
How to test GPRS for deployment of panel
Before the system is mounted you will need to check the GPRS level to make sure it is adequate
. If the level
is 3/5 or better you can mount the control panel in that location.
GPRS Errors when running GPRS LEVEL
Codes
Error
010
SIM card not detected/not inserted
043
Provisioning problem, contact cellular provider
132
SIM card not activated
255
Cannot connect to cell tower
GPRS Codes in Event Log
Codes
Error
256
Cannot connect to cell tower
11
SIM not ready if multiples, SIM not detect if only one
48
Signal rejected by host, IP, Domain Name, or Port are incorrect
10/12/27 10:53
DISARMED LVL:3
GPRS LEVEL
TEST IN PROG.
YES = END
Press the
arrow to move to MAINTENANCE.
Press the
arrow to move to GPRS LEVEL.
GPRS LEVEL
Press and hold ESC/NO for 5 seconds to return to the main
menu.
This test can take up to 5 minutes to complete. Pressing the
YES, ESC/NO, or CLR buttons will prematurely end the test.
This test will automatically issue the results to the display of
the keypad when it has completed with either a level out of 5
(0/5-5/5) or an error code (listed below). Use the arrow keys
to keep the keypad awake during the test.
YES
YES
MAINTENANCE
GPRS LEVEL
X/5
Press YES on GPRS LEVEL to start the test.
