2011/11/10 Ed 1.5
Setup and Programming manual for XT series GPRS
14 |
P a g e
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
YES
GPRS
PARAMETERS ?
APN CODE
APN CODE:
xxxxx.xxxxxx.xxx
Your APN code (Access Point Name) is given to you by your
Cellular Provider. Press
YES to enter into the parameter
and use the Keypad to complete the code. Press
YES to
confirm your entry and the
arrow to move to the next
parameter.
USERNAME
PASSWORD
Your USERNAME is given to you by your Cellular Provider.
Press
YES to enter into the parameter and use the
Keypad to complete the name. Press
YES to confirm
your entry and the
arrow to move to the next parameter.
PASSWORD:
xxxxxxxxxxxx
USERNAME:
xxxxxxxxxxx
YES
IP1 ADDRESS
IP1 ADDRESS:
xxx.xxx.xxx.xxx
DOMAIN NAME 1
YES
DOMAIN NAME 1:
xxxxx.xxx.xxx
PORT 1
PORT 1:
xxx
YES
YES
YES
YES
Your PASSWORD is given to you by your Cellular Provider.
Press
YES to enter into the parameter and use the
Keypad to complete the name. Press
YES to confirm
your entry and the
arrow to move to the next parameter.
Your IP1 address is given to you by your Central Station.
Press
YES to enter into the parameter and use the
Keypad to complete the address. Press
YES to confirm
your entry and the
arrow to move to the next parameter.
*You will use either a IP address or a Domain Name but not
both
*When entering an IP address you must enter all 12 digits
including preceeding 0s.
Your Domain Name is given to you by your Central Station.
Press
YES to enter into the parameter and use the
Keypad to complete the name. Press
YES to confirm
your entry and the
arrow to move to the next parameter.
*You will use either a IP address or a Domain Name but not
both leave it blank if an IP has already been entered.
The Port is given to you by your Central Station. By default
the panel will use 888. If you need to modify the port press
the
YES key to enter into the parameter and the keypad
to complete the port. Press
YES to confirm and the
arrow to move to the next parameter.
GPRS PARAMETERS?
Continue through IP2 and TMT IP.
Once you have entered all valid parameters press ESC/NO
to return to the main menu then ESC/NO again to move to
the next parameter.
ESC/NO
ESC/NO
