Reef
To make the sails smaller in strong winds
Retaining Pin On a trolley, to hold the launching trolley to the road base
Road Base A trolley that you place your boat and launching trolley upon to
trail behind a vehicle
Rowlocks U shaped fittings that fix onto the gunwale and holds your oars in
position while rowing
Rowlock Holes The holes in the gunwhale into which the rowlocks fit
Rudder The foil that, when attached to the stern, controls the direction
of the boat
Rudder Blade The large, rigid, thin part of the rudder
Rudder Downhaul The control line that enables you to pull the rudder into place
Rudder Pintle The fitting on the transom onto which the rudder stock fits
Rudder Stock The top part of the rudder, usually including the tiller, into which the
rudder blade fits, and which then attaches to the rudder pintle
Run To ‘run with the wind’, or to sail in the direction that the wind is blowing
S
Safety-Boat Cover Support boats, usually RIBs, in case of emergency
Sail An area of material attached to the boat that uses the wind to
create forward motion
Sailmaker
A manufacturer of sails
Sail Number The unique number allocated to a boat, displayed on the sail
when racing
Sail Pressure A sail has ‘pressure’ when it is working with the wind to create motion
Sailing Regatta An event that usually comprises of a number of sailing races
Shackle A metal fitting for attaching ropes to blocks, etc.
Shackle Key Small key used to undo tight shackles
Sheet A rope that controls a sail
Shroud The wires that are attached to the mast and the hull, holding
the mast up
Side Safety Line The line that runs along the side of the hull
Single Handed To sail a boat alone
Single-Line Reefing System An efficient method of reefing with one line
