RS Automation AnyTouch V8 Plus Series, Operating Instructions Manual

Page: 8 / 20

8
V808+ OPERATING INSTRUCTIONS
RS Automation Co., Ltd.
Made in Japan
TYPE :
INPUT : 24VDC
CURRENT : 0.6A
Ser No. : 0711001 a
LAN U-B U-A
RESET
CN1
24VDC
FG
CN5
CN7
CF
MJ1 MJ2
Do not Replace Battery in a
Hazardous Location. Replacement
of Battery shall be done by an
expert only. See operating or
maintenance instruction for
type of battery to be used.
Battery replacement.
1. Slide the battery holder cover in the direction of the arrow shown in the illustration above to open it.
2. Check that the battery is securely attached to the backside of the cover, and connect the battery connector.
3. Close the battery holder cover.
4. Enter a date five years from now for "Battery replacement" on the sticker on the battery holder.
5. Turn on the power to the V8+ unit and check that the battery is correctly mounted on the Main Menu screen.
When the battery is not connected, the message "Battery not set" is displayed on the screen. When the battery has
been set, the message disappears.
When the battery voltage has dropped, the message "Brownout Battery" is displayed. It is strongly recommended to
replace the battery immediately even it has not been passed for five years.
Sticker on the Backside
The sticker affixed to the backside of the unit denotes as follows:
Write down the date
five years from now.
Type
Serial number
Voltage
Current
UL/cUL mark
CE mark
Notes on Usage of Lithium Battery
AnyTouch is delivered without inserting the battery connector in the battery holder on the back of
the unit. Be sure to set the battery when using the calendar function or the SRAM. Without battery,
the contents in the SRAM or calendar will not be retained.
Clock and Backup Memory Specifications
Item Specifications
Battery Specification Coin-type lithium primary cell
Backup Memory SRAM 512 kbytes
Backup Period 5 years (at the temperature of 25 ° C)
Battery Voltage Drop Detection Provided (internal memory allocated)
Calendar Accuracy
Remainder on a month 90 seconds (at the temperature of 25 ° C)
Battery Mounting Procedure
Electric shock hazard
Steps 1 to 4 must be performed when the power to the V8+ unit is turned off.