RS Automation AnyTouch V8 Plus Series, Operating Instructions Manual

Page: 4 / 20

4
V808+ OPERATING INSTRUCTIONS
General Specifications
Item Model Specifications
Compatible
Specification
CE marking EN61000-6-2, EN61000-6-4
UL/cUL UL508
Rated Voltage 24 VDC
Permissible Range of Voltage 24 VDC ± 10%
Permissible Momentary Power Failure 24 VDC: Within 1 ms
Power Consumption (Maximum Rating) 23 W or less
Rush Current 20 A or less (2 ms or less)
Withstand Voltage DC external terminals to FG: 500 VAC per minute
Insulation Resistance 500 VDC, 10M Ω or above
Surrounding Air Temperature 0 ° C to +50 ° C
Storage Surrounding Air Temperature - 10 ° C to +60 ° C
Surrounding Air Humidity
85% RH or less
(without dew condensation, wet-bulb temperature 39 ° C or less
*1
)
Altitude 2000 m or lower
Atmosphere No corrosive gas, no excessive dust, and no conductive dust
Vibration Resistance
Vibration frequency: 10 to 150 Hz, Acceleration: 9.8 m/s 2 (1.0 G),
Half-amplitude: 0.075 mm, 3 directions of X, Y and Z: one hour
Shock Resistance
Pulse shape: Sine half wave
Peak acceleration: 147 m/s
2
(15 G), 3 directions of X, Y and Z: 6 times
Noise Resistance 1500 Vp-p (pulse width 1 µ s, rising time: 1 ns)
Static Electricity Discharge Resistance Compliant with IEC61000-4-2, Contact: 6 kV, Air: 8 kV
Pollution Degree
*2
For use in Pollution Degree 2
Grounding Less than 100 Ω , FG/SG separated
Structure
Protection structure : front panel complies with IP65
rear case complies with IP20
Form : in a body
Mounting procedure : inserted in a mounting panel
Sheet metal thickness : 1.5 to 5 mm
Cooling System Cooling naturally
Weight Approx. 1.5 kg
Dimensions W × H × D 233.0 × 178.0 × 65.8 mm
Panel Cut-out Dimensions 220.5
+0.5
- 0
× 165.5
+0.5
- 0
mm
Material PC/ABS
*1 Use the unit with the wet-bulb temperature 39°C or less. Otherwise, it may cause a malfunction.
*2 This index indicates the degree to which conductive material is generated in the environment where the
equipment is used.
In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to
condensation.