Green indicates the YardMaster has switched to A.
Red indicates the YardMaster has switched to B.
Red/Green Flashing indicates Programming mode. Open the sensor terminals
and cycle power (turn off and on) to exit programming mode.
ST
A
TUS LED
Programming LED
LED indicators
Y
M
ard
aster
Turnout Controller - Lamp Driver - Power Switcher
RR-Concepts.com
1
2
3
4
5
6
20
19
18
17
16
15
7
11
8
12
9
13
10
14
o The RED LED will flash when any sensor is detected except when
programmed as a node.
o When in Programming mode each red Blink will increase
the time delay or node ID.
o When performing a time delay a slow blink will occur.
RR-Concepts.com
