RPS 3EGF020333 Manual Download Page 49

Page: 49 / 90

6.5.2 Connecting the terminal allocation

Personnel:

Qualified electrician for high and

medium voltage

Protective equip-

ment:

Protective clothing

Industrial safety helmet

Protective gloves

High-vis clothing

Requirement:

The TracFeed

SFA has been connected.

Chapter 6.5.1 ‘Connecting the electromechanical remote

motor drive’ on page 47

Connect the control cable to the terminal strip.

For the terminal allocation, see the terminal

allocation diagram and the schematic dia-
gram for the respective TracFeed

SFA.

6.6 Final checks

6.6.1 Mechanical tests and stroke setting

Personnel:

Trained qualified personnel

Protective equipment:

Protective clothing

Industrial safety helmet

Protective gloves

Safety footwear

High-vis clothing

Tool:

Hand tools

Requirement:

The force-displacement transmission device is connected to
the TracFeed

SFA.

Attach the crank handle to the crank cam and carry out mul-

tiple mechanical test switching operations.

NOTICE!
Property damage to the TracFeed

SFA

due to overwinding!

Do not continue to wind the TracFeed

SFA beyond the limit

stop.

If the TracFeed

SFA operates sluggishly or tension occurs,

determine the cause and rectify it.

Assembly

Final checks > Mechanical tests and stroke setting

14.09.2022

TracFeed

SFA Electromechanical remote motor drive

Summary of Contents for 3EGF020333



























































































Search results

Summary of Contents for 3EGF020333

Reviews:

Related manuals for 3EGF020333

Brands by name

Popular brands

RPS 3EGF020333, Manual

Search results

Summary of Contents for 3EGF020333

Reviews:

Related manuals for 3EGF020333

Brands by name

Popular brands