8.1.2 Lubricate the gear spindle
1.
Have the control room disconnect the power supply to the
TracFeed
®
SFA.
2.
Clean the gear spindle (Fig. 17/1) with a cloth.
3.
Lubricate the gear spindle (Fig. 17/1) with a brush and lubri-
cant
‘Gleitmo 805’
.
4.
Have the control room reconnect the power supply to the
TracFeed
®
SFA.
8.1.3 Extraordinary check
This check is carried out after extraordinary events, e.g.:
n
Short circuits
n
Extreme weather situations (storm, heat, ice, hail > 4 cm)
n
Fire below and in the immediate vicinity (< 50 m) of the contact
line (effects of heat, soot deposit) and contact with extin-
guishing agent (foam)
Scope of check:
n
Inspection of the area in question as per state check Z.
Check interval:
n
As needed.
Fig. 17: Lubricate the gear spindle
Preventive servicing
Maintenance plan > Extraordinary check
14.09.2022
TracFeed
®
SFA Electromechanical remote motor drive
56
