35
In the high season, it is imperative to aspire to the pool at least once every fifteen days.
You should connect vacuum tube to the Skimfilre, then switching on the pump and vacuum.
Finished vacuuming, we recommend cleaning the cartridge.
With a manual vacuum:
As to the water line should be cleaned once a week, though it appears clean, so as to prevent
the accumulation of fat, which at first sight, is not detectable.
Normally, you just need to use the wall brush provided with the kit to clean the water line.
However, there may be fat and dirt embedded in particular in the steps or in the corners of the
pool. In that case, apply without diluting a gel cleanser for the water line on a cloth or sponge
and rub the affected area. If the dirt is situated very close to the water, then lower water level
so that the product does not dilute and to obtain a more effective cleaning.
Leave it working for 5 minutes and wipe with a sponge.
During high season, you should clean the cartridge at least once a month and each time you use
the vacuum cleaner. By the end of the high season, if you winter your pool, you may take out the
skimfilter cartridge and keep it in a dry room.
You can clean the cartridge with a water jet, or after being dry with a brush.
CLEANING THE POOL AND THE WATER LINE
CLEANING THE SKIMFILTRE CARTRIDGE
Normally, with a skimfilter you do not need to clean the pumps pre-filter; except if you have a sand filter.
CLEANING THE PRE-FILTRE PUMP
1. Connect the hose to the vacuum head
2. Insert the head of the vacuum in the water
3. With the filtration running, fill the tube with water, placing it ahead of an outlet nozzle
4. Attach the other end of the tube inside the Skimfiltre
5. Pass the vacuum head slowly to prevent dust from rising and do not remove it from the water
6. After vacuuming, clean the cartridge Skimfiltre.
ATTENTION:
Never use abrasive products or thinners such as trichlorethylene, acetone,
tetrahydrofuran, among others. These can cause irreversible damage to the liner of
your pool.