When the icon
MANUAL
flashes, use the
key
CONFIRM
to enter the manual function
control procedure (section 2.4) or the key
NEXT
to pass to the following function (
RUN
).
In this screen, the keys
+
and
–
are disabled.
The
RUN
indication on the display means that the
control panel is performing an operation cycle.
After two seconds, the main default screen with
clock and battery charge state is displayed.
In this screen, the
keys +, –, NEXT
and
CONFIRM
are disabled.
2.2 - PROGRAMMING THE CLOCK AND THE WEEEKLY CALENDAR
From the main menu it is possible to access the programming procedure of
the clock and weekly calendar.
NOTE:
the icons printed in grey indicate that they are blinking. The rain sensor and
the battery icons are on or off according to the actual charged state of the battery and
the ground conditions (wet or dry).
MANUAL FUNCTION
CONTROL
CONTROL PANEL RUN-
NING
Programmatore_serie_DIG_GB.indd 9
18/07/12 15.06