SETTING WATERING
START TIME: HOURS
Use keys
[+]
and
[-]
to set the watering start time.
Upon first start of the control panel or if no
information is previously set, zero is displayed.
When the desired start time has been selected,
press
CONFIRM
to enter the minute programming
procedure; keep the key pressed for 10 secs. to
save the data and exit from the procedure.
To quit the procedure without saving the data
press
NEXT
for three seconds.
CONFIRM
: confirms the value and passes to the
following item (
MINUTES
).
NEXT
:
exits the programming procedure
without data backup.
[+]
:
sets the start time (1 -12).
[-]
:
sets the start time (1 -12).
Programmatore_serie_DIG_GB.indd 23
18/07/12 15.06
