SETTING WATERING
START TIME:
MINUTES
Use the function keys
[+]
and
[-]
to set the minutes
of the watering start time.
Upon first start of the control panel or if no
information is previously set, zero is displayed.
When the desired value has been selected, press
CONFIRM
to enter the
AM/PM
programming
procedure; keep the key pressed for approximately
10 secs. to save the data and exit from the
procedure.
To quit the procedure without saving the data press
NEXT
for three seconds.
CONFIRM
: confirms the value and passes to the
following item (
AM/PM
).
NEXT
:
exits the programming procedure
without data backup.
[+]
:
sets minutes of start time (00 -59).
[-]
:
sets minutes of start time (00-59).
Programmatore_serie_DIG_GB.indd 24
18/07/12 15.06
