9
Insert the 3/8” O.D. Air Supply Hose (P/N:
08-428) into the push-lock fitting on the
left side of the monitor. To disconnect,
press the outside ring of the push-lock
and pull the hose out. Note: Hose can be
trimmed to the desired length.
CONNECT THE AIR SUPPLY
Figure 2.1
When using Battery Clips (08-431),
connect:
- Black = Negative
- Red = +12V (± 0.5V)
1
2
+
-
Connect the power supply by screwing
it onto the receptacle on the left side
of the unit (next to the air inlet fitting.)
Plug the AC Adaptor into a power
source.
Connect the air supply hose to a
Grade D air source regulated to between
7 to 80 PSI (50-550 kPa). Maximum air
flow is achieved at 20 PSI.
CONNECTING THE POWER SUPPLY
between 10-125psig.
Figure 3.1
Figure 2.2
Figure 3.2
