10
If using an external alarm device,
connect the plug into the auxiliary
outlet. The use of an external alarm is
recommended when the GX4 cannot
be seen or heard by the operator. The
external alarm should be located near
the work area to alert the operators of
the status.
Alternatively, the auxiliary can control a
shut off valve, or other safety device.
Figure 4.1
CONNECT THE EXTERNAL ALARM
SETUP
(CONTINUED)
To configure your own external device,
use the bare end AUX cable (08-434).
It is recommended to use a qualified
electrician when wiring to ensure you
do not damage the electrodes.
- Incorrectly wiring your auxiliary can
permanently damage your unit.
- Always use a qualified electrician.
- Damage to the auxiliary is not
covered under the manufacturer’s
warranty.
1.
Brown
- 12V DC
2.
Blue
- Alarm Out
3.
Black
- Ground
4.
White
- Alert Out
5.
Green
- OK Out
Figure 4.2
