5
BEFORE YOU USE YOUR
GX4.
Unpack the unit from the shipping
carton and remove the shrink wrap
from the sensor cartridge. Read all
instructions and warnings that are
included with the unit. Dispose of the
removed packaging responsibly making
sure there is nothing important left
inside.
REGISTRATION:
Go to: http://go.myrpb.com/GX4-reg
to register your GX4 and be notified
of software updates and important
product information.
UPDATES
The GX4 firmware should be updated
regularly to ensure you have access
to the latest features and maintain
compatibility with the latest cartridges.
Visit http://go.myrpb.com/GX4-Update
for information on the latest software
and how to upgrade your unit.
SENSOR CHECK:
Checks should be performed when a
new cartridge is installed and monthly
thereafter. This will insure the cartridge
is within calibration and providing
adequate protection.
Follow the Sensor Check instructions
on page 17 to check the calibration
of the cartridges. If the cartridge is no
longer within calibration, follow the
instructions for removing it and replace
it with a new cartridge.
LOCATION
SETUP
Place the GX4 in a place that:
- The alarm can be heard
- Is protected from water and impact
See mounting instructions on pg. 8.
