5
DOWNROD / BALL ASSEMBLY
Slide the canopy and yoke cover on the downrod. Thread the power wires from the fan through
the canopy, and downrod (take extra care not to pull power wires damage).
Set downrod into yoke. Rotate until the holes match.
Insert connector bolt through the holes. Be careful not to damage wiring.
Tighten the two downrod set screws to make sure the fan run stable.
HANGING THE FAN MOTOR ASSEMBLY
Lift the fan assembly onto the mounting bracket.
Ensure the notch of the ball joint is positioned on the stopper of the mounting bracket to
prevent the fan from rotating when in operation.
Mounting bracket
Stopper of bracket
Notch of ball joint
Canopy
Coupling cover
Lock pin
Cross bolt
Downrod
Security screw
Summary of Contents for 1073-PC
Page 1: ...1073 PC For Models Installation Guide 1073LED PC...
Page 16: ...RP 082119...
