Features & Specifications
R-122V Features:
• Very high overload characteristics – maximum SPL greater
than 135dB
• Vacuum tube electronics offer greatly enhanced output and
constant, optimized impedance to the ribbon element
• Extremely low residual noise
• Ribbon element is unaffected by heat or humidity
• Absence of high frequency phase distortion
• Excellent phase linearity – even off axis
• Equal sensitivity from front or back of element
• Consistent frequency response regardless of distance
• Compact size
Electrical Specifications
Acoustic Operating Principle:
Electro-dynamic pressure
gradient
Polar Pattern:
Figure-8
Generating Element:
2.5 micron aluminum
ribbon
Frequency Range:
30HZ – 15,000HZ
±
3dB
Sensitivity:
-36dBv Ref 1 v/pa
Self Noise:
<18dB
Output Impedance:
200 Ohms balanced
Rated Load Impedance:
1000 Ohms minimum
Maximum SPL:
> 135dB
Microphone Cable:
7-Pin male to female XLR
Output Connector:
Male XLR 3 pin (pin 2
hot)
Vacuum Tube:
5840-W miniature type
with wire leads
Power Requirements:
100-120 VAC 50-60HZ,
220-240 VAC 50-60HZ
Fuse Type (2 Slo-Blo):
Located in IEC power
connector
200-ma for 110-120 volts,
100-ma for 220-240-volts
All Royer monaural microphones are also available in matched
pairs.
28
Summary of Contents for R-122V
Page 31: ...Polar Pattern Frequency Response 30 ...
Page 32: ...Notes 31 ...
