manualshive.com logo in svg

Royce 610, User Manual, Page: 29 / 58

Share
Download
Royce 610 User Manual Download Page 29

3-6 

PRINT SUMMARY 

This selection allows the operator to select whether or not the printout will include 
a summary section. Press the center mouse button to toggle the setting. 
 

PRINT CODES 

This selection allows the operator to select whether or not the printout will include 
a section that groups test results by failure code. Press the center mouse button 
to toggle the setting. 
 

PRINT DATA 

This selection allows the operator to select whether or not the printout will include 
a test data section. Press the center mouse button to toggle the setting. 
 

PRINT STYLE 

A  choice  of  two  printout  styles  is  available.  Style  “A”  is  brief,  style  “B”  includes 
more in-depth data analysis. Press the center mouse button to toggle the setting. 
 

PRINT SPACING 

Printouts can be single or double spaced. Press the center mouse button to toggle 
the setting. 
 

UP: RIGHT   DOWN: LEFT 

This  selection  allows  the  operator  to  define  the  test  head  positioning  and  menu 
scrolling  functions  of  the  left  and  right  mouse  buttons.  Press  the  center  mouse 
button to toggle the setting. 
 

MOUSE SCROLL 

This  selection  allows  the  operator  to  toggle  the  ability  to  scroll  the  menus  by 
front/back movement of the mouse. Press the center mouse button to toggle the 
setting. 

Summary of Contents for 610



























































Reviews:

No comments