2-8
2.4.2 Mouse
A three-button mouse is used to control test functions, pull hook placement, menu
functions, and limited fail code entry. Please refer to section 4.2.3 for information on fail
code entry with the mouse.
Do NOT attempt to use any mouse except the factory supplied mouse. If replacement
ever becomes necessary, please contact Royce Instruments LLC.
2.4.2.1
Test Functions and Pull Hook Placement
Test functions and hook placement are controlled by the mouse when the test screen is
displayed on the LCD.
Test Functions:
Press the center mouse button to start a test. The system will complete the test. During a
test, press any mouse button to end the test before completion.
Pull Hook Placement:
Vertical hook movement is controlled by user programmable mouse buttons. Press the
left button to move the hook in one direction and the right button to move the hook in the
other direction. Direction of each
button is programmable in the
TEST SETUP menu.
Pressing the center button in addition to either the left or right button increases the
movement speed. The slow movement controlled by the left and right buttons can be
adjusted. The fast movement is set at 500 mils per second and cannot be adjusted.
Rotation of the pull hook is controlled by moving the mouse to the left or right. The
sensitivity of hook movement to mouse movement can be adjusted in the TEST SETUP
menu.
2.4.2.2
Menu Functions
Menu functions are controlled by the mouse when the main menu or any of the sub-
menus are displayed on the LCD.
Viewing the menus
To move through the menus, press the left or right button to scroll upward or downward.
Direction of each button is programmable in the TEST SETUP menu. The longer a
mouse button is held down, the faster the menu items scroll.
Selecting a Menu Item
1. Press the center button to select an item.
If the menu item provides more than 2 settings; press the left or right button to increment
or decrement the value of the setting. Direction of each button is programmable in the
TEST SETUP menu.
To accept the setting and exit to the menu, press the center button.
For menu items with alphanumeric data entry requirements, please refer to the keypad
section for further instructions.
Summary of Contents for 610
Page 2: ......
