![background image](http://html1.mh-extra.com/html/royal/600sc/600sc_instruction-manual_1494075091.webp)
Alpha 600sc User’s Guide
85
Installing a New Paper Roll
Installing a New Paper Roll
As you use the cash register, you will need to replace the paper roll.Your
cash register has a thermal printer that prints receipts for the customer or a
journal tape. Use 2¼ inch (57.5 mm) wide standard thermal register paper.
To install the paper roll
1
Insert the PRG key and turn it to either REG1 or REG2.
• If you need a customer receipt, turn the Mode key to the REG1
position.
• If you do not need a customer receipt, turn the mode key to the REG2
position.
2
Unlock and open the Journal Compartment Cover. Grip the left side of
the cover and gently pull upward. Remove the Journal Compartment
Cover and set aside.
3
Remove the Journal
Takeup spindle.
Place the paper roll
in the little round
area at the bottom of
the compartment.
Make sure the paper
feeds out from the
bottom of the roll,
towards the front of
the cash register.
4
Grab the small
handle on the right of the print
roller. Push the little handle towards
the back of the cash register and
raise the roller bar up.
5
Lay the end of the paper across the
printer as shown. Move the print
roller down onto the paper and
snap into place. Make sure both
sides are snapped down.
• Press the
Feed
key until the paper catches and moves through the
printer.
6
Do one of the following:
Handle