Royal 600sc Instruction Manual Download Page 90

Page: 90 / 143

Alpha 600sc User’s Guide

Maintenance and Options

Follow these steps to make sure your cash register works well.

• Your register must remain uncovered when turned on. This allows the

electronic components to properly cool.

• Use a dust cover when the register is not in operation and the control

lock key is turned to the OFF position to protect mechanical components
from dust.

• Keep beverages and other liquids away from the machine to avoid spills

which can damage electronic components. Use the optional protective
keytop cover to prevent damage to the cash register.

• Keep the cash register away from dust, dampness, or extreme hot or cold

temperatures.

• To clean your cash register, use a soft dry cloth. Do not use harsh

solutions containing alcohol or ammonia.

• After storing your cash register in extreme temperatures (below 32

degrees Fahrenheit or above 104 degrees Fahrenheit), allow the
temperature inside the machine enough time to reach room temperature
before turning it on.

• If you need electronic service, take the cash register to a Royal

authorized service center. For more information, see Limited Warranty
on page 130.

HAPTER

Summary of Contents for 600sc
















































































































































Search results

Summary of Contents for 600sc

Reviews:

Related manuals for 600sc

Brands by name

Popular brands

Royal 600sc, Instruction Manual

Search results

Summary of Contents for 600sc

Reviews:

Related manuals for 600sc

Brands by name

Popular brands