Dimensional Detection (DD)
The Dimensional detector measures the width of the center of each bill, looking for odd sized
banknotes
To Change Counterfeit Settings
Press and hold “CF”.
“MG” will be flashing on the screen together with the word “OFF” or “ON”. Press the “
▲
”button to turn
ON the MG (magnetic) counterfeit detection mode or press the “
▼
button ” to turn OFF the MG
(magnetic) counterfeit detection mode. The ON or OFF LED light will be flashing to indicate which
setting has been set.
Next, Press “CF”.
“UV” will be flashing on the screen together with the word “OFF” or “ON”. Press the “
▲
” button to turn
ON the UV (ultra violet) counterfeit detection mode or press the “
▼
” button to turn OFF the UV (ultra
violet) counterfeit) detection mode. The ON or OFF LED light will be flashing to indicate which setting
has been set.
Next, Press “CF”.
“IR” will be flashing on the screen together with the word “OFF” or “ON”. Press the “
▲
” button to turn
ON the IR (Infra-red) counterfeit detection mode or press the “
▼
” button to turn OFF the IR (infra red)
counterfeit detection mode. The ON or OFF LED light will be flashing to indicate which setting has
been set.
Next, Press “CF”.
“DD” will be flashing on the screen together with the word “OFF” or “ON” flashing. Press the “
▲
”
button to turn ON the DD (dimensional detection) counterfeit detection mode or press the “
▼
” button
to turn OFF the DD (dimensional detection) counterfeit detection mode. The ON or OFF LED light will
be flashing to indicate which setting has been set.
Finally, press “ENTER/START” to save and exit the counterfeit detection setting mode.
CONTROL PANEL AND OPERATION
(Continued)
6
