Value Counting:
This bill counter is equipped with Value Counting feature. In Value Counting setting, the bill
counter will show the total by denomination, the total value and total amount. Each denomination
must be counted separately.
To set to value counting mode, press “ADD”. Then on the keypad press the denomination to be
counted ($5 – $100 for Canadian currency, $1-$100 for US Currency). After the denomination is
counted, press the next denomination to be counted and continue until all denominations needed
to be counted are complete.
When complete, press and hold “REPORT” to view the total number of bills, the value of each
denomination and the total value.
CONTROL PANEL AND OPERATION
(Continued)
Value Counting -Single Denomination Counting-
Select the denomination to be counted from the Numeric/Denomination keypad
Place banknotes in hopper.
The total number of bills and denomination value will show on display screen after banknotes are
counted.
Multi-Denomination Value Counting-
Press “ADD”.
Select denomination to be counted from the Numeric/Denomination keypad
Place banknotes in hopper.
Select next denomination and repeat process above.
After all denominations are have been counted press and hold “REPORT” and the number of
banknotes and value for each denomination along with a total value will de displayed
11
