6
PRODUCT OPERATION
1.
Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on.
-
The unit will conduct an automatic self-diagnostic test to ensure accurate counts.
-
After five seconds of the counting wheels spinning, the screen will display a "0".
-
If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAYS
-LOCATED ON PAGE 10.)
2.
Select bill counting settings:
Before counting, select counting settings that are related to your counting needs:
-
ADD mode:
The ADD mode displays the cumulative total of all bills counted. To turn ADD mode on, press "ADD".
-
BATCH mode:
The machine is preset to common counting mode. To count bills in batches, press the “BATCH” key. Batching is
preset to 100 bills. To change the batch amount, use the keypad to enter a batch number between 1 and 999. Press
“Enter/Reset” to save the setting. Press the “BATCH” key again to clear.
-
Auto and Manual Start Modes:
The machine is preset to automatically start counting bills once placed into the hopper. To change to manual start
mode, press the “MNL” key, insert the bills into the hopper, and press the “Enter/Reset” key. Press the “MNL” key again
to return to auto mode.
-
Value Counting:
The machine will total the number of bills by denomination and total value by denomination as well as provide a grand
total. Each denomination must be counted separately. To operate press the “ADD” key. Then on the keypad press the
denomination to be counted ($1 - $100). After denomination is counted press the next denomination to be counted
and continue until all denominations needed to be counted are complete. Then press the “DISPLAY” key to view the
total number of bills and values of each denomination along with a grand total.
Single denomination counting-
Select denomination to be counted from the Numeric/Denomination keypad
Place bills in hopper.
Total number of bills and denomination value will show on display screen after bills are counted.
Multi-Denomination Value Counting-
Press the “ADD” key.
Select denomination to be counted from the Numeric/Denomination keypad
Place bills in hopper.
Select next denomination and repeat process above.
After all denominations are have been counted hit the “DISPLAY” key and the number of bills and value for
each denomination along with a grand total will show on the display screen.
