Royal Enfield SCRAM 411 2021 Owner'S Manual Download Page 20

Page: 20 / 110

Royal Enfield Scram 411

OPERATION OF CONTROLS

1. Turn handle bar to extreme left

or right position.

2. Switch “OFF” ignition

gently depress key and turn

anticlockwise further till

steering is locked and remove

key.

1. Insert key, turn clockwise to ignition “OFF” position. If

required, gently shake handle bar to help unlock steering

easily.

STEERING LOCK
LOCKING:

UNLOCKING

Do not force or attempt to lock/unlock steering if the handle bar is

not in extreme left or right side. Failure to adhere to this caution will

damage the lock and also cause the key to bend or break.

After unlocking steering and before starting engine check the handle

bar free movement by turning to both left and right sides several

times.

Failure to do so will cause unstable riding, leading to a potential

accident, resulting in serious injury to both rider and other road

users, besides causing severe damage to the motorcycle.

WARNING

CAUTION

Summary of Contents for SCRAM 411 2021















































































































Search results

Summary of Contents for SCRAM 411 2021

Reviews:

Related manuals for SCRAM 411 2021

Brands by name

Popular brands

Royal Enfield SCRAM 411 2021, Owner'S Manual

Search results

Summary of Contents for SCRAM 411 2021

Reviews:

Related manuals for SCRAM 411 2021

Brands by name

Popular brands