Royal Enfield Scram 411
2
All information in this manual is based on the latest product
information available at the time of publication. Due to
continuous improvements there may be discrepancies
between the information in this manual and your motorcycle.
Royal Enfield reserves the right to make production changes
at any time without prior notice and without incurring any
obligation to make the same or similar changes to motorcycles
previously built or sold. All images shown are for reference to
explain and need not to be exactly the same on the model you
own. Technical specifications are subject to change without
prior notice. "© Copyright 2021 Royal Enfield (A unit of Eicher
Motors Ltd.). All Rights Reserved. No part of this manual shall
be copied,distributed or otherwise dealt without the express
permission in writing of Royal Enfield"
Part No. RAM00385/A / Qty. 1000 / Oct. 2021 /
NOTE
Disclaimer
This motorcycle meets the BS VI emission norms.
NOTICE
1. Do not polish matt finished paint surface in your motorcycle as
it will increase the gloss level.
2. Wash the painted parts only with plain water and do not use any
strong solvents cleaning agents or detergents.
3. Scratches, if happens on the matt finish parts cannot be
touched up and corrected / removed.
4. Warranty is not applicable for any matt finished painted parts of
the motorcycle.
5. The heat resistance coated components such as silencer pipe,
exhaust etc.., shall not be wiped clean with oiled cloth as it can
generate smokewhen the vehicle is driven and also leave patch
marks.
