Royal Enfield Scram 411 73
MINOR MAINTENANCE TIPS
1. Ensure the motorcycle is on a
firm, flat surface and the rear
wheel is off the ground.
2. Gently remove the brake hose
along with its rubber grommets
from the locating clips on the
swing arm.
3. Loosen rear axle nut on the
right side and remove along
with washer.
4. Pull out the wheel axle from
the left side, taking care not to
drop the wheel spacers.
REAR WHEEL REMOVAL
5. Remove the brake caliper assembly
from the slot in the swing arm
along with ABS wheel speed sensor
and support it suitably to avoid
damage to the brake hose and ABS
wheel speed sensor.
6. Slide out the rear wheel from the
swing arm, taking care not to drop
the spacers on the wheel hub .
Do not press the brake lever when wheel is removed as this will
result in the brake pads coming out too far from the brake caliper.
CAUTION
1. Place a suitable spacer of 4 mm thickness, between the brake
pads to avoid accidental compression of the brake lever.