Royal Enfield Continental GT Owner'S Manual Download Page 8

Page: 8 / 122

It is our endeavour to provide excellent service to your CONTINENTAL GT at all times. Towards this we provide 4 free

services at specific Intervals.

Please avail these services at the specified time, in any of the Royal Enfield Authorised Dealer / Service Point nearest to you

and as a token of satisfactory services, kindly return the free service coupon duly filled in and signed, to the service outlet.

Availing the free services in the specified time is a prerequisite for warranty consideration. The cost of fuel, oil, grease etc.

used for all free services are chargeable to the customer.

NOTE :

Please ensure that the free service details are recorded in this sheet immediately after the service is carried out.

Date of Service
Kms Covered
Servicing ASP /
Dealer’s Name
Address

Service

Dealer / ASP

Rubber Stamp

Dealer / ASP

Rubber Stamp

Dealer / ASP

Rubber Stamp

Dealer / ASP

Rubber Stamp

Free Service Record

Summary of Contents for Continental GT



























































































































Search results

Summary of Contents for Continental GT

Reviews:

Related manuals for Continental GT

Brands by name

Popular brands

Royal Enfield Continental GT, Owner'S Manual

Search results

Summary of Contents for Continental GT

Reviews:

Related manuals for Continental GT

Brands by name

Popular brands