50
Minor Maintenance Tips
Max
Min
Fill recommended
oil to engine till the
oil level is upto
“MAX” level mark in
the oil window in
Crankcase Cover
RH.
SPARK PLUG
Cleaning and adj usting gap (Refer Periodical
Maintenance Chart for frequency)
Remove HT Lead and the spark plug from the
cylinder head using the plug spanner and
Tommy bar.
Clean the insulator tip and electrodes of the plug
carefully using a pointed scraper or spark plug
cleaner.
Set the gap between 0.80 to 0.90 mm.
Refit the spark plug on the cylinder head and
connect H.T. Lead.
NOTE :
Replace oil filter paper element whenever oil is being
replaced.
CAUTION :
Do not fill oil over “MAX” mark. It may cause the engine
to smoke and result in loss of power. Do NOT use the
motorcycle if the oil is below the “MIN” mark. Doing
so will cause serious damage to the moving parts
inside the engine and result in an engine lock up.
Soak a new oil filter paper element in the oil and
refit on the Crankcase Cover RH.
Assembly 3 bolts and tighten them. Ensure ‘O’
Ring and gaskets are taken seat properly.
Gap 0.80 to 0.90 mm.
Summary of Contents for Continental GT
